RM155

View Image

155 - Taillight Wiring Kit with bulbs.

A self-contained wiring system that replaces your towed car's turn signals, running lights and brake lights with a set of independent plugs and sockets mounted inside the taillights. Wiring is routed underneath the car, to a socket mounted to the grille of fascia.

Since the towed vehicle's electrical system is bypassed, this kit eliminates the concern of voiding the vehicle manufacturer's warranty.

Note: The towed vehicle's taillight must have room for an extra socket and bulb inside the lens housing. Lighting is required by law in all states.

RM1559                           Base Plate for 2007 Honda CRV

                                           Price:$426.00

RM1644

View Image

1644 - 4 Wire Flexo-Coil Kit with Bracket.

Connects electricity between towed car and motor home. Cable expands to over 8' and conveniently contracts for storage. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. The 4-wire Flexo-Coil has 4-16 gauge wires and the 6-wire Flexo-Coil has 4-16 gauge wires & 2-14 gauge wires.

RM792

View Image

2 Pack Hy-Power Diode- Use of this product also requires the addtion of our Hy-Power Diodes.Depending on the number of lights involved; (two, three or four) tail-lites,brake-lites & signal-lites on the Tow Vehicle.

Select: RM792 (2-pack), RM793 (3-pack), RM794 (4-pack)

By preventing electrical feedback, Roadmaster's HY-POWER diodes allow you to splice into the towed car's wiring system without damaging expensive electronic dash components. Reduces wiring hassles. Trouble-free operation. Two-pack required for most vehicles. Includes detailed wiring instructions.

RM793

View Image

3 Pack Hy-Power Diode

By preventing electrical feedback, Roadmaster's HY-POWER diodes allow you to splice into the towed car's wiring system without damaging expensive electronic dash components. Reduces wiring hassles. Trouble-free operation. Two-pack required for most vehicles. Includes detailed wiring instructions.

RM794

View Image

4 Pack Hy-Power Diode

By preventing electrical feedback, Roadmaster's HY-POWER diodes allow you to splice into the towed car's wiring system without damaging expensive electronic dash components. Reduces wiring hassles. Trouble-free operation. Two-pack required for most vehicles. Includes detailed wiring instructions.

View Image

4 Wire Flexo-Coil Kit.

Connects electricity between towed car and motor home. Cable expands to over 8' and conveniently contracts for storage. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. The 4-wire Flexo-Coil has 4-16 gauge wires and the 6-wire Flexo-Coil has 4-16 gauge wires & 2-14 gauge wires.

View Image

4 Wire Straight Kit

Connects electricity between towed car and motor home. Cable expands to over 8' and conveniently contracts for storage. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. The 4-wire Flexo-Coil has 4-16 gauge wires and the 6-wire Flexo-Coil has 4-16 gauge wires & 2-14 gauge wires.

View Image

6 Wire Flexo-Coil Kit with Bracket.

Connects electricity between towed car and motor home. Cable expands to over 8' and conveniently contracts for storage. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. The 4-wire Flexo-Coil has 4-16 gauge wires and the 6-wire Flexo-Coil has 4-16 gauge wires & 2-14 gauge wires.

View Image

6 Wire Flexo-Coil Kit.

Connects electricity between towed car and motor home. Cable expands to over 8' and conveniently contracts for storage. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. The 4-wire Flexo-Coil has 4-16 gauge wires and the 6-wire Flexo-Coil has 4-16 gauge wires & 2-14 gauge wires.

View Image

6 Wire Straight Kit

Connects electricity between towed car and motor home. Cable expands to over 8' and conveniently contracts for storage. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. The 4-wire Flexo-Coil has 4-16 gauge wires and the 6-wire Flexo-Coil has 4-16 gauge wires & 2-14 gauge wires.

View Image

7 to 4 Wire Flexo-Coil Kit.

Connects electricity between towed car and motor home. These electrical cords are used on coaches with a 7-way plug connecting to a towed vehicle that requires a 4 wire or 6 wire system on the towed vehicle. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. All the features of the regular Flexo-coil and straight cables listed above are included in the 7-way wiring kits.

$85.95

View Image

7 to 4 Wire Straight Kit

Connects electricity between towed car and motor home. These electrical cords are used on coaches with a 7-way plug connecting to a towed vehicle that requires a 4 wire or 6 wire system on the towed vehicle. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. All the features of the regular Flexo-coil and straight cables listed above are included in the 7-way wiring kits.

View Image

7 to 4 Wire Straight Kit

Connects electricity between towed car and motor home. These electrical cords are used on coaches with a 7-way plug connecting to a towed vehicle that requires a 4 wire or 6 wire system on the towed vehicle. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. All the features of the regular Flexo-coil and straight cables listed above are included in the 7-way wiring kits.

View Image

7 to 6 Wire Flexo-Coil Kit.

Connects electricity between towed car and motor home. These electrical cords are used on coaches with a 7-way plug connecting to a towed vehicle that requires a 4 wire or 6 wire system on the towed vehicle. Both models are vinyl coated & spring coiled. Plugs are injected with silicone to prevent corrosion. The wires are water, oil and chemical resistant. All the features of the regular Flexo-coil and straight cables listed above are included in the 7-way wiring kits.

$82.95

View Image

732 - Brite-Lite 3 to 2 Converter

The Brite-Lite converts a 3-wire (amber turn) towing vehicle to a 2-wire towed vehicle. Lab tests have shown Brite-Lite makes turn signals 65% brighter and brake lights 25% brighter than other brands. Brite-Lite can help prevent rear-end collisions in heavy traffic or under adverse conditions. Heavy-duty aluminum heat sink design effectively dissipates heat and outlasts other brands.

View Image

910030 - Electrical Socket Bracket Straight

This electrical socket bracket is made from 1/8" thick steel - NOT SHEET METAL. Both brackets fit most 4-wire and 6-wire electrical sockets. They can also be welded or bolted in place and come with a black powder coat finish.

View Image

Deluxe Magnetic Tow Lights (includes case and anti-scratch pads)

Includes 4 wire electrical plug, sockets and 30 feet of cable. Heavy-duty vinyl casing for maximum protection. Eliminates electrical damage to towed vehicle. Polished magnets hold tow lights securely, also included are anti  scratch pads for added protection to your vehicle. There is no splicing into towed vehicle's wires. DOT approved lights SAE IST 93.  Lighting is required by law in all states.

View Image

Single Hy-Power Diode

By preventing electrical feedback, Roadmaster's HY-POWER diodes allow you to splice into the towed car's wiring system without damaging expensive electronic dash components. Reduces wiring hassles. Trouble-free operation. Two-pack required for most vehicles. Includes detailed wiring instructions.

$12.95

View Image

Single Park Light Diode

PROBLEM: Electrical damage can occur to the towed vehicle if its headlights are turned on while still connected to the motor home. Jeep Cherokees and Grand Cherokees are especially susceptible to this type of damage.

SOLUTION: Install Roadmaster's PARK LIGHT DIODE. This will prevent any power from the car from reaching the motor home. With the PARK LIGHT DIODE installed, there is no interaction between the two park light systems, thereby preventing any electrical damage. Recommended for use on all vehicles.

View Image

Standard Magnetic Tow Lights (case and anti-scratch pads are not included)

Includes 4 wire electrical plug, sockets and 30 feet of cable. Eliminates electrical damage to towed vehicle. Polished magnets hold tow lights securely. There is no splicing into towed vehicle's wires. DOT approved lights SAE IST 93.  Lighting is required by law in all states.

View Image

Universal Wiring Kit with 4 Diodes.

This kit uses a system of diodes to connect your motor home's turn signals, running lights and brake signals to your car's. Diodes prevent electrical feedback and protect both vehicles' electrical systems. Also included is all the electrical cord necessary to wire almost any vehicle for towing behind a motor home.

Kit includes step-by-step instructions on how to install. Molded four-wire electrical cords, three feet of pre-split plastic wire loom, ring terminal, wire connectors, four 'Hy-Power' diodes, and cable ties.

Lighting is required in all states.

View Image

Universal Wiring Kit.

The Universal Wiring Kit contains the components necessary to wire cars or trucks for towing behind a motor home. Prevents electrical feedback and protects both vehicles' electrical systems. The kit comes with step-by-step instructions, 30' molded 4-wire with connections, 6' molded 4-wire with connections, 3' plastic wire loom, ring terminal, wire connectors, cable ties and 2 Hy-Power diodes. The Best towed car wiring kit available. Lighting is required in all states.